<Back to Control Released Products>

Basket Extruder

The Basket Extruder program is our lowest pressure short path extruder design. Available from bench level through multiple ton per hour sizes these versatile extruders are made for both pharmaceutical as well as industrial designs.

Radial Extruder

The Radial Extruder Program includes a full range of single and double screw radial extruders which are manufactured in pharmaceutical as well as industrial designs.

Axial Extruder

The A xial extruder has either single or twin screws depending on the throughput required. Our laboratory UICE can provide as small capacity as 25 grams and our largest axial extruders are fed either independently a wetted powder or are closely coupled with a twin sigma blade mixing in the same system.

The screws transport the wetted powders to the straight mesh/die which can be provided with varying thicknesses as can the holes for extruding. Unlike most axial extruders that are available we have refined the die design to optimize the process according to the rheology of the client materials. Our axial dies are available from 0.5 - 5 mm with varying thickness up to 5 mm.

Cone Extruder

The cone extruder has single screw which transfer the material to the cone shaped mesh The perforation size possible is from 0.5 - 5 mm. The density of pellets is comparable to radial design of extrusion.

Die-Roller Extruder

The principle of operation for Die Roller Extruder utilizes two rollers. The first roller is called the knurling roller and its job is to push the wetted feed material through the holes in the other roller which is the perforated die roller. The perforation size of the roller decides the size of extrudates, but the performance of the die roller extruder is defined by the sophistication of the perforated die roller design. Umang has many years of experience in refining these dies to succeed where our competitors have failed.

The extrudates are cut to finite lengths with the help of adjustable cutter within the perforated roller. The size of extrudates that is possible is 0.8 mm - 10.0 mm and capacities are up to and including multiple tons per hour.

Melt Extruder

Our melt extruders for pharmaceuticals and nutraceutical applications provide a direct route to granular form without the additional steps necessary for other formation methods. This can help economically as well as limiting the damaging effects of heat and sheer of multiple step processes.

As in each of our technologies, our experienced scientists will help in application of this technology program for your applications including both simple testing as well as complex formulation and project development.

Combined UICE Extruder

The principle of operation is with two rollers, one is the knurling roller and other is the perforated die roller. The perforation size of the roller decides the size of needless. The extrudes are cut to finite length with the help of adjustable cutter Size possible is 0.8 mm - 10 mm.